Archive for January, 2012

For all Samsung Galaxy Fit S5670 users who were asking for the Cyanogen Mod ROM, here it is as in the due course of the article we will see on how you can install the latest version of Gingerbread 2.3.7 version. This update is basically a custom ROM and not the official or leaked Stock / Default ROM. You need to be very careful as in you need to follow all the instructions very carefully while applying this update or else there is a high probability that you may even brick your phone. We have tried our level best to make this article crisp and short in order to facilitate the faster and speedier update process.

Over a period of this article we will see on what are the list of –

  1. Pre Requisites,
  2. Enhancements in Cyanogen MOD ROM for Galaxy fit,
  3. Procedure to update Galaxy fit s5670 with Gingerbread 2.3.7 Cyanogen MOD Release

Note: Please note that this Cyanogen Mod release if the un official release and still the Official Cyanogen MOD ROM is not yet released, so ensure that you are flashing at your own risk.

Disclaimer: We should not be held responsible in any manner just in case if anything happens to your device which is a very unlikely case if you follow the instructions which are mentioned in the due course of the article.

This update is not the Official update which is released by the Samsung Electronics Ltd. and is the custom ROM which is released by the third party developer. Also, in the process of applying this custom ROM, you will have to root the phone and after which you will be losing the warranty which can be claimed only when you update with any of the Stock releases of Gingerbread Update which we have seen earlier. Soon, a modified version of Ice Cream Sandwich Android 4.0 version will be arriving for the Galaxy fit s5670 phone which too will be covered here.

Enhancements in the Cyanogen MOD ROM:

    Camera issue has been fixed in this firmware of Cyanogen,
    Gingerbread 2.3.7 AOSP Build,
    Video Playback has been fixed,
    Headset Button is now fully working,
    FM Radio Works better than ever,
    Fixed Built number GWK74,
    Setup Wizard Fixed,
    Super user application now comes updated by default,
    New kernel based on Ketut,
    Camera Orientation bug has been fixed,
    Compass works perfectly,
    Battery too has been optimized so as to give higher battery life and also the Internet browser is now faster than ever
    Also there are many performance fixes which have been worked around to give better user experience with new fresh User interffit

Pre Requisites:

  • Charge your device to a minimum of 90% as since the procedure is bit lengthy, the phone will consume more battery than the normal usage. Lesser battery will lead to the turning Off of the device in the middle of the firmware update process.
  • Back up all your data which is there in the phone memory, as in an unlikely event if the data gets lost then you can easily restore the backup.
  • Up next is you need to ensure that the USB Debugging is enabled in your phone. The USB Debugging can be enabled from the path of Settings > Applications > Development > USB debugging. Apart from this you also need to ensure that your computer has ADMIN privileges and USB Read / Write Access. It’s not recommended to use computers which have limited access.

Special Instructions to users on Custom ROM:

Just in case if you are any of the custom ROMs then you need turn Off your phone so that you can then enter into the recovery mode. The recovery mode can be entered by pressing Volume UP Key + Middle button, and holding both simultaneously press the Power Button. You can also refer to an interactive video to know more on how you can enter the same in the recovery mode. If the device boots normally then you need to again try to enter the same.

In the recovery mode, select the options like Wipe data/factory reset, Wipe Cache partition and then select reboot system now to reboot the phone. You can select the options using the Volume keys and can select the appropriate option by pressing the Power button. This basically clears off all the cache data which is there in the phone so that the room can be made to accommodate this all new custom ROM firmwares
So let’s head to the procedure which is mentioned Further..

Procedure to update Samsung Galaxy Ace with Cyanogen Mod Gingerbread 2.3.7 ROM:
For your convenience, we have created different steps wherein you can follow individual step easily.
Step 1: Base Firmware Installation:

  • First up you need to update your phone with the 2.3.x version of firmware. You need to follow the instructions which are mentioned below in the form of Links. Please note that it’s a base firmware and you need to install it.

Procedure to Update Samsung Galaxy Fit S5670 to DDKT1 Firmware

Now, once you updated the device.You will need to proceed to install the Clock Work MOD Recovery in your phone which we will see in the next step.

Step 2: Clock Work MOD Installation

  • First up you need to download the beni_cwm-5_ext4_v2.tar.Extract the file and Find Odin 4.38.exe And BENI_v1.0.ops in your Extracted Folder.
  • Now, Switch off Your Fit And Enter into Download Mode By Pressing Power+Menu Button+Volume Down Button Until Downloading Mode Appears.Open S5670_Odin_Multi_Downloader_v4.38.exe.Place BENI_v1.0.ops on OPS tab.Check the One Package Option.Place beni_cwm-5_ext4_v2.tar on One Package tab.Connect the device to PC which you have put in Downloading Mode.Press Start and wait for flashing process is finished.

After this you will have to proceed to the next step which is mentioned Further

Step 3: Installation of Cyanogen Mod 7.2 RC3 ROM

  • First up you need to download Zip file which is mentioned below in your computer

CyanogenMod 7.2 RC3 For Galaxy Fit.zip

          Google Apps.zip

  • Now, once you are done with downloading the above files in your computer, you need to now copy the files in your phone and ensure that you are not placing these file deep into the phone. Please note that you should not modify or rename the files which you have downloaded or else there is a high probability that the file would not be supported.
  • After this Enter in Recovery Mode by Holding Power Off + Menu Button Until Recovery Mode Appears.
  • In the recovery mode, you will have to choose “choose zip from SD”. Now, from the list of files and paths you will need to first select the file which is named as “update CM 7.2 RC3″. Ensure that you select the file properly.
  • Now, as soon as the process is over.Select Wipe Data/Factory Reset And Wipe Cache Partition.Again Select “choose zip from SD”and Select “gapps” which You Have downloaded Earlier.After All Done Select “Reboot System Now”.

So, there you go as soon as the phone is rebooted you will see that the firmware is updated with the latest version of Cyanogen mod 7.2 RC3 ROM Gingerbread 2.3.7. Let us know in the comments section just in case if you face any issues as we will try our level best to sort out the same.

Good news for Galaxy R users as an all new Official firmware has arrived and is dubbed as Gingerbread 2.3.6 firmware. This update will be very short lived as an all new Official version of Android 4.0 ICS will be rolling out very soon in this Year. Though this update is official you can update with the help of KIES too but for all those who are on the beta firmwares and KIES doesn’t recognize the device too can apply this update as we will see in the due course of the article on how to manually apply tis update. The update which we will be checking out is specially for Indian Galaxy R users, though it can be applied by any Galaxy R I9103 users as it’s a Global update with Multi CSC. The version is dubbed as ZCKJ3 Gingerbread 2.3.6.

Disclaimer: Please note that this process of firmware update is not recommended for the basic users and is only recommended for the advanced users. Also, we should not be held responsible for any damage happened to your device in any manner after applying this update.

So, let’s proceed with the list of Pre Requisites you need to follow after which we will see the Further procedure.

Pre Requisistes:

  • So as to ensure that the data is kept safe, you need to backup the same using the below mentioned tips so that just in case if the data gets erased or gets corrupted, the same can be easily restored Later on.(Optional)
  • A minimum of 50% battery charge needs to be there left in the device so as to ensure that the phone doesn’t get turned Off in the middle of firmware update. The APN Settings are located in this path, Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names, you need to note all these manually on a piece of paper so that you can reconfigure the same. Disable tools like Security Suites, Firewall tools and also the KIES PC Suite as these tools generally tend to interrupt the process of firmware update.

So, once you are done with all the above instructions, it’s time to proceed further where we will see on what are the instructions to update Galaxy R with Gingerbread 2.3.6 ZCKJ3.

Procedure to Update Galaxy R GT I9103 with Gingerbread ZCKJ3 2.3.6 Firmware:

  • Download Gingerbread 2.3.6 Package & Odin.zip in your computer. Once you download the same, you need to extract it. In the process of extraction, you will be prompted to enter the password, enter the password as “sampro.pl” without inverted comas. After extracting, open the Odin tool in your computer.
  • Now, enable the USB Debugging from the path “Settings > Applications > Development > USB debugging” after which turn off your phone so as to enter the phone in the Download Mode.
  • The download mode can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button. Refer below Video for more.
  • As soon as you enter the phone in the Download mode, connect the phone to the computer after which you will see that the ID : COM section in the Odin will turn yellow which will mean that all the drivers are successfully installed. Please don’t proceed further is the ID : COM section doesn’t turn yellow.

  • Note: If ID : COM doesn’t turn yellow then install Samsung USB Drivers, .net framework and also you need to update the KIES with the latest version so that the missing drivers are installed. Also, most importantly you need to have the admin rights so as to turn ID : COM section yellow.

    • After this you need to click on “PDA” to select file “GT-I9103_INU_I9103ZCKJ3.tar.md5” and click on “Start”. Once the process gets finished, the phone will be restarting. Once the phone gets restarted, you need to remove the USB cable when you see the Home Screen.

      • Now, you need to Close the Odin in computer and turn off phone so as to enter into the Download Mode once again. Once the device is turned ON in the download mode, open the odin in your computer and with the help of USB cable, connect the phone to the computer.
      • Once phone is connected, the ID : COM section will turn yellow. Click on “PDA” to select the file “Kernel_I9103ZCKJ3.tar.md5” and then click on “Start”. Within a minute the device will be restarted. Now after you see the home screen, remove the USB cable to enjoy your Galaxy R GTI9103 on the latest and official Gingerbread 2.3.6 update.

      For users Facing Force Close Errors:

      • Just in case if you are facing issues with the force close errors then you need to turn Off the phone to enter your phone in the recovery mode. The recovery mode can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button.

      In the recovery mode screen, you need to select “Wipe Data / factory reset” and “Wipe Cache Partition” which will clear off all the data which is stored in the phone.
      Do let us know just in case if you face any issues in the comments section below as we will try to address them as soon as possible.

      The Samsung Galaxy Ace S5830I is big hit and it’s among the top selling Android Smartphones after Galaxy S, Galaxy S II and Galaxy Note. Good news for the Galaxy Ace users in India as there is an Android 2.3.6 update available for them. This is an official release from Samsung and the users should be able to update it Over the Air. This upgrade will update Android version to Android 2.3.5 and if you are on 2.3.5 then you can directly proceed with the software.

      This update is available via OTA and you don’t require any connection to Samsung KIES. If you are on GPRS please make sure that you switch over to Wi-Fi as it may cost you much for the download of the software file.
      There is no official change released by Samsung in this update and we are sure that this will fixes bugs from the previous version and it will provide few improvements and enhancements. This update will delete contacts, call logs, phone memory storage files and we recommend you to back it up before you update. In some cases you might receive notification of this update on your device, if you have received such follow the onscreen instructions and update with the same. If you have not received any such then you can check it manually. To do that follow the path of home screen and hit Menu > Settings > About Phone > System update and click on Android update. Your update will be automatically be installed on your handset and you would be able to use your handset within 10 minutes.
      To check the software version on your device after update you need to go to Home Screen tap on Menu > Settings > About phone and check the Android version present on your handset. It should show Android 2.3.6 after the update. Do let us know about your experience after the firmware upgrade. If you wants to get Ice Cream Sandwich overlay on your Galaxy Ace, although officially Samsung has announced that Galaxy Ace will not receive ICS update as hardware is not compatible you can install Styled Custom ROM and have a fell of Android 4.0. For your information Galaxy Ace successor is arrived in the form of Galaxy Ace Plus and do check it out its specifications.
       The S5830I model does have a better camera and a few more features, but the price jump is almost unrealistic.

      Here is the news for Galaxy S2 users as an all new Official firmware has arrived and is dubbed as Gingerbread 2.3.6 firmware. This update will be very short lived as an all new Official version of Android 4.0 ICS will be rolling out very soon in 2012. Though this update is official you can update with the help of KIES too but for all those who are on the beta firmwares and KIES doesn’t recognize the device too can apply this update as we will see in the due course of the article on how to manually apply tis update. The update which we will be checking out is specially for Indian Galaxy S2 GT I9100 users, though it can be applied by any S2 I9100 users as it’s a Global update with Multi CSC. The version is dubbed as XWKL1 Gingerbread 2.3.6.

      Note: This update is not for Galaxy S2 I9100G users and is strictly for the devices of whose the model number is GT I9100. If you are not sure of the Model number then you can find by dialing “*#1234#” in your phone after which you will get to see the model number of yours.

      Disclaimer: Please note that this process of firmware update is not recommended for the basic users and is only recommended for the advanced users. Also, we should not be held responsible for any damage happened to your device in any manner after applying this update.

      So, Let’s proceed with the list of Pre Requisites you need to follow after which we will see the further procedure.
      Pre Requisistes:

      • So as to ensure that the data is kept safe, you need to backup the same using the below mentioned tips so that just in case if the data gets erased or gets corrupted.

      Note: Don’t backup the below mentioned data with the help of KIES as it may or may not support KIES after the update.

      • A minimum of 50% battery charge needs to be there left in the device so as to ensure that the phone doesn’t get turned Off in the middle of firmware update. The APN Settings are located in this path, Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names, you need to note all these manually on a piece of paper so that you can reconfigure the same. Disable tools like Security Suites, Firewall tools and also the KIES PC Suite as these tools generally tend to interrupt the process of firmware update.

      So, once you are done with all the above instructions, it’s time to proceed further where we will see on what are the instructions to update Galaxy S2 with Gingerbread 2.3.6 XWKL1.

      Procedure to Update Galaxy S2 GT I9100 with Gingerbread XWKL1 2.3.6 Firmware:

      • Download Odin3_1.85.zip & Gingerbread 2.3.6 Package in your computer.Once you download the same, you need to extract it.Password For Extraction:”sampro.pl”(Without Inverted Commas). After extracting, open the Odin tool in your computer.
        • Now, enable the USB Debugging from the path “Settings > Applications > Development > USB debugging” after which turn off your phone so as to enter the phone in the Download Mode.
        • The download mode can be entered by pressing Volume down Key, Center button, and holding both simultaneously press the Power Button. Refer below Video for more.
        • As soon as you enter the phone in the Download mode, connect the phone to the computer after which you will see that the ID : COM section in the Odin will turn yellow which will mean that all the drivers are successfully installed. Please don’t proceed further is the ID : COM section doesn’t turn yellow.
         
        • Note: If ID : COM doesn’t turn yellow then install Samsung USB Drivers, .net framework and also you need to update the KIES with the latest version so that the missing drivers are installed. Also, most importantly you need to have the admin rights so as to turn ID : COM section yellow.

        • After this you need to click on “PDA” to select file “GT-I9100_INU_I9100XWKL1_I9100ODDKL1_I9100DDKL1.tar.md5” and click on “Start”. Once the process gets finished, the phone will be restarting. Once the phone gets restarted, you need to remove the USB cable when you see the Home Screen.
        • Now, you need to Close the Odin in computer and turn off phone so as to enter into the Download Mode once again. Once the device is turned ON in the download mode, open the odin in your computer and with the help of USB cable, connect the phone to the computer.
        • Once phone is connected, the ID : COM section will turn yellow. Click on “PDA” to select the file “Kernel_I9100XWKL1.tar.md5” and then click on “Start”. Within a minute the device will be restarted. Now after you see the home screen, remove the USB cable to enjoy your Galaxy S2 GTI9100 on the latest and official Gingerbread 2.3.6 update.

         

        For users Facing Force Close Errors:

        • Just in case if you are facing issues with the force close errors then you need to turn Off the phone to enter your phone in the recovery mode. The recovery mode can be entered by pressing Volume Up Key, Center button, and holding both simultaneously press the Power Button.

        In the recovery mode screen, you need to select “Wipe Data / factory reset” and “Wipe Cache Partition” which will clear off all the data which is stored in the phone.
        Do let us know just in case if you face any issues in the comments section below as we will try to address them as soon as possible.


        With the launch of Galaxy Nexus 4G LTE device with ICS 4.0, Now It’s time to unlock the boot loader so that you can then proceed to customize the phone the way you want it. Over a course of this article we will check on how you can unlock the boot loader. Please note that by unlocking the boot loader, the warranty will get void for which we should not be held responsible. Before proceeding, ensure that you have noted down on which exact firmware you are ON currently so that it will help you to restore the same if just in case anything happens to your device in an unlikely event. This will be very beneficial as only with the help of this we will be able to not only root the phone, install the custom recovery image but also one can easily install the custom ROMs which are available for this Galaxy nexus Phone.

        Disclaimer: We should not be held responsible for any damage happened to your device in the process of applying this procedure.

        FAQ:

        Q. Will I still get the Official OTA Updates after Unlocking Bootloader?
        A. Most of the users have myth that after unlocking, the updates won’t be pushed but it’s not correct. The OTA updates will be available even if you unlock the boot loader. Only if you have updated your phone with different firmware version, you won’t be able to get the updates, the reason being is its unable to check the current firmware on which you are on.

         There are two Quick List of pre Requisistes which you need to follow so as to facilitate the smoother firmware update.

        • Backup all the data present in your phone memory so that the same can be restored back just in case if any data is lost or corrupted. Please don’t use PC Suites to back up the data as after unlocking he boot loader the Galaxy Nexus may / may not support the PC Suite.
        • Close / disable all the Antivirus, Firewall and PC suites like KIES in your computer or else these tools will interrupt the process of firmware update.

        • Before proceeding, install Galaxy Nexus 4G LTE Drivers in your compute and ensure that you are on the computer which is having a minimum of Windows XP / Windows 7. After this, you also need to enable the USB debugging from the path “Settings > Applications > Development > USB Debugging” as shown in the below screen capture.

        • Now, assuming that you have installed the ADB, place the fastboot.exe file in your SDK / Tools folder if it’s not here by default. If it’s not there, then you can download the fast boot and place the same.
        • Now, next up you need to connect the original USB cable which you got at the time of purchase and then head to the SDK / Tools folder in the ADB in your computer where adb.exe and fastboot.exe files are located.
        • Now press the “Shift” button, right click on the file to select “Open Command Window Here” after which you will see the image as shown below.
        • After this, type in the command as mentioned below after which your phone will be turning Off and then reboot the device in the Boot loader mode.

        adb reboot bootloader


        • Now, all you need to do is to type the command,

        fastboot oem unlock

        • After which you will be prompted on the screen as shown below on to whether you wanted to unlock the boot loader or not along with the policy as shown in the below screen capture.

        • Now, with the help of Volume keys, select the option of “Yes” and then press the Power button to select the same. After this, the boot loader will be unlocked successfully.

        • Please note that it may take longer boot time. So ensure that you wait for the same to get rebooted on its own. Just in case if the phone boots up in the loop mode, you need to clear the cache from the recovery mode. Just in a rare case, if the phone gets stuck in the middle of any above step, you need to repeat the whole procedure from the start.

        So, after this, you will see that the device will be unlocked. Do let us know just in case if there is anything you would like to share with us in the comments section below. We will try our level best to ensure that all the issues are sorted out at the earliest.

        Hot news is here, Google updates is Nexus range of handsets with an all new update for Verizon Powered Galaxy Nexus device in the form of 4.0.2 version of Ice Cream Sandwich. So, let’s quickly check out on how in the due course of this article to apply the update of Ice Cream Sandwich manually in your GSM international version of unlocked Galaxy Nexus phone.

        Disclaimer: Please note that we should not be held responsible in any manner in whole or in parts if any damage is done to your device caused by updating the firmware which is a very unlikely event if you follow the instructions as mentioned in the article including the pre requisites and the procedure to update the phone.

        DANGER: Please note that this process should not be applied by the users who are on Verizon Wireless.
        Quick List Pre Requisites:

        • As mentioned above, you need to back up the data so that just in case if the data gets lost then you can restore the same back.
        • You should be familiar with the fast boot, installation of ADB in your Phone and also along with these you also need to ensure that the Boot loader of Galaxy Nexus is unlocked.

        So, let’s head to the instructions on how to apply the update in your GSM version of Galaxy nexus.
        Procedure to Update Galaxy Nexus GSM version with Ice Cream Sandwich 4.0.2:

        • Download the appropriate factory ICS Image from Google’s Official Page in your computer.
        • After this, ensure that you have enabled the USB Debugging in your phone from the path Settings > Applications > Development > USB debugging as shown in the below image. Also, if at all there are any Antivirus suites installed in your phone then remove or disable the same.

        • After this, you need to turn Off your phone so as to boot the phone in the fast boot mode. The fast boot mode can be entered by “Holding Volume Up key + Volume Down Key + Power Key” which will open up the Administrator command prompt in your fast boot directory.
        • After this, connect your phone to the computer and open the command prompt to enter the below mentioned commands in the fast boot mode.

        fastboot flash bootloader bootloader-maguro-primekk15.img
        fastboot reboot-bootloader
        (Wait till the Boot loader is Rebooted)
        fastboot flash radio radio-maguro-i9250xxkk6.img
        fastboot reboot-bootloader
        (Wait till the Boot loader is Rebooted)
        fastboot update image-yakju-icl53f.zip

        So, that’s it as soon as you enter all the commands which are mentioned above, the device will be updated successfully with the latest version of Ice Cream Sandwich.

         Waiting for your manufacturer to update your device to latest Android OS version is a painful thing. And the case with users of Galaxy Tab 10.1 is no different, to whom promised Ice Cream Sandwich update from Samsung will shower not anytime before stated Q1 2012 release — which means March ‘12, if btw not delayed to April ‘12.
        So, there is a right reason to cheer for, when we hear that a developer (or team of 2) has released his own rom, based on Android 4.0, Ice Cream Sandwich for the Samsung Galaxy Tab 10.1 (WiFi version only, btw). Yes, you can run Ice Cream Sandwich on your Galaxy Tab before 2012 arrives and that too without waiting for Samsung to gift you an update.

        Warning!
        The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!!

        Compatibility
        This rom and the guide below is compatible only with Galaxy Tab 10.1 (WiFi edition with no 3G), model number GT-7510. Don’t try this on Galaxy Tab 10.1 with 3G. Also, it’s not compatible with any other device. Check your device’s model number in: Settings » About device.

        Things to take care of before Installing ROMs

        1. Installing/Flashing this ROM will erase your apps and data. So, it’s a very important you back them up before proceeding further. To backup your apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc.Restore APN settings if Internet isn’t working for you, after installing the rom. And if you are using a rooted phone, you can save application’s data too, using Titanium backup (free app on android market) to backup apps with apps with data. Use the same app again to restore those apps with data.
        2. Drivers! — it’s important you’ve the proper drivers installed. Download links — 32 bit (x86) Windows |   64-bit (x64) Windows

        Camera isn’t working in this rom right now, although that doesn’t mean much for a tablet. That apart, you’ll experience bugs here and there. But for all Ice Cream Sandwich love this tablet’s gonna get you, and given that Samsung will take its own (huge) time in bringing you the update, it’s still very very exciting rom.
        If you’re a pro, with sound knowledge of CWM, flashing, etc., it’s easy for you. Just download the Android 4.0 rom from step 2 below, and flash using CWM. However, if you’re ‘new’ to all this, see the guide below.

        How to Install Ice Cream Sandwich (CM9) on Galaxy Tab 10.1 (WiFi only)

        1. You’re going to need a Clockworkmod recovery to flash the ICS rom on your Tab. Either Google it or look here on how to install Clockworkmod (CWM) recovery on your Galaxy Tab 101. P7510 WiFi edition.
        2. Download the latest version of the rom from the development page here. Current version (Dec 26, 2012) can be downloaded from here.
        3. Transfer the rom to your tablet’s internal sdcard. Remember the location of file on sdcard. 
        4. Disconnect the tablet from PC. Power it off — wait for 6-7 seconds after screen goes off.
        5. Boot into recovery mode — press and hold (until you see two options) both Power and Volume down keys. Press Volume Down key to move your selection recovery mode’s icon and press Volume Up select the recovery mode.
        6. [Optional] Make a backup of you current rom from backup and restore option.
        7. Do wipe data/factory reset.
        8. Do wipe cache partition.
        9. Go to Advanced, and do wipe dalvik cache.
        10. Come back to main screen and select install zip from sd card » choose zip from sd card (or internal sdcard, if that works) » browse through sdcard and select the rom file you transferred in step 3 above. Select Yes on next screen.
        11. This will begin the flashing of Cyanogenmod 9 on your Galaxy Tab 10.1. You’ll be back recovery mode. Go back and select reboot system now, to restart the tablet. 
        12. Upon restart, your Galaxy Tab 10.1 will be running coolly on Android 4.0 – Ice Cream Sandwich. Enjoy!

        Share your thoughts and problems, if any, in comments below.